Whiteboard Paint
Whiteboard is a special coating designed to transform almost any surface into a writable whiteboard, suitable for use with appropriate markers and easy to erase without leaving marks.
Easy to apply on walls, cement, wood, plasterboard, electrostatically painted surfaces and similar substrates.
Also suitable for application on old whiteboards for renovation.
Whiteboard is highly resistant to daily cleaning and wear.
Εργαλεία εφαρμογής
Συσκευασία
Χαρακτηριστικά
High gloss
Long-lasting durability
Excellent finish
High coverage
Easy application
Resistant to UV radiation
Επιφάνεια
Concrete
Concrete
Plasterboard
Metal
Wood
Τεχνικά στοιχεία
Απόδοση
Αραίωση
Επιφανειακό στέγνωμα
Χρόνος Επαναβαφής
• Apply on dry, clean surfaces, free from materials that may prevent adhesion.
• Successful application depends on proper substrate preparation and correct application of the material.
• Mix component A with component B using a low-speed mixer for 2-3 minutes. Then leave the mixture for 30 seconds and mix again for a further 1 minute.
• Important! The full quantity of component A must be mixed with component B in the ratio provided for each set. If a smaller quantity of final product is required, the components must be weighed in the same ratio by weight.
• Also ensure that the final material (A+B) does not remain in the container for more than 50 minutes without being used, as the material will begin to set and will no longer be workable.
• Then apply the material to the surface with a roller or brush in one or two coats.
• To adjust viscosity, it may be diluted with 5% nitro thinner or polyurethane thinner.
During application, keep tools “wet” inside the container or paint tray. Drain the paint thoroughly from the tools back into the tin and clean them with nitro thinner or polyurethane thinner.
