E2 Energy Efficient – Thermal insulating exterior wall coating
Nanotechnology-based acrylic elastomeric coating providing thermal insulation, waterproofing and high solar reflectance.
Formulated with new-generation 3M reflective thermal-insulating glass microspheres.
Provides excellent thermal insulation and waterproofing, offers protection against mould and helps reduce building energy consumption.
Delivers long-lasting protection and excellent resistance to solar radiation (UV) and atmospheric pollution.
Allows the substrate to breathe. Classified as a cool coating, with a thermal conductivity coefficient λ of 0.3.
Application tools
Packaging
Features
High whiteness and reflectance
Energy saving
Improves the building’s thermal-insulation performance
Resistant to weathering and moisture
High coverage and long-lasting protection
Specially formulated so that the cured film resists mould growth
Certified by 3M laboratories
Surfaces
Concrete
Plasterboard
Plaster
Brick
Wood
Technical Data
Coverage
Thinning
Touch Dry
Recoat Time
• Apply to dry, clean surfaces free from any material that may impair adhesion.
• Successful application depends on correct substrate preparation and proper application of the product.
• Remove all foreign matter, dust and residues from the surface.
• Prime the surface with two coats of either emulsion primer or DESMO SEAL solvent-thinnable primer.
• Once the primer begins to dry, apply E2 ENERGY EFFICIENT MASONRY PAINT in two coats.
• To adjust the application viscosity, thin with 5–15% water.
• Apply the second coat after the first coat has dried.
During application, keep tools wet in the container or paint tray. Drain as much paint as possible from the tools back into the tin, then clean them with water.
