Aqua Seal Elastic
AquaSeal Elastic is a ready-to-use, elastic, fast-drying liquid membrane for interior and exterior applications.
It is used to create waterproof layers before the installation of ceramic tiles, natural stone and decorative aggregates in balconies and terraces, bathrooms and shower cabins, swimming pool areas, saunas and areas exposed to moisture.
AquaSeal Elastic can be applied directly on concrete, cement-based floors and screeds with special binders, plasterboard, existing ceramic tiles, mosaic and natural stone floors, as well as cement-based render.
Εργαλεία εφαρμογής
Συσκευασία
Χαρακτηριστικά
High floor protection
Resistant to weather conditions and atmospheric pollution
Excellent hardness
Easy application
Επιφάνεια
Concrete
Cement
Plasterboard
Ceramic Tiles
Cementitious Render
Τεχνικά στοιχεία
Απόδοση
Αραίωση
Επιφανειακό στέγνωμα
Χρόνος Επαναβαφής
• Substrates must be cured, stable, clean, dry and free from oils, grease, cement residues, old paint and any other substance that may prevent bonding.
• Cement-based substrates must be stable, dry and free from rising damp.
• Surface dust must be completely removed.
AquaSeal must be applied in two even, thin coats, approximately 0.4 mm each, using a long-pile roller, brush or spatula.
Once the first coat has dried, becoming darker in colour with a matt finish, apply the second coat diagonally to the first, approximately after 1 hour at +23°C and 50% relative humidity, provided the product is applied onto substrates with residual moisture below 3%.
The final thickness of the two AquaSeal coats must be at least 0.8 mm, in order to form a rich, continuous elastic membrane.
Make sure there are no gaps in the membrane caused by substrate imperfections.
AquaSeal can be easily cleaned from tools and surfaces with water while still wet.
