Crystal Bond
Crystal+Bond Liquid Glass is a solvent-free, water-free, two-component epoxy resin.
It is suitable for creating horizontal surfaces with a flawless decorative finish and is intended for interior use.
Crystal Bond Liquid Glass can be applied and combined with many different materials, making imagination the only limit to achieving a unique artistic result.
It can be mixed with powder pigments, such as iron oxides, glitter, or used as a clear coating over decorative effects.
Create impressive tables, three-dimensional artworks and decorative pieces with natural elements such as shells, keepsakes, ornaments, jewellery, photographs, coins and many other materials.
Thanks to its excellent resistance to mechanical stress, cleaning agents and various chemicals, it is also suitable for flooring applications with decorative elements such as pebbles, three-dimensional images and other embedded objects.
Crystal Bond is also suitable for protecting surfaces made of wood, metal, stone, ceramic, porcelain, cardboard and similar materials.
It can also be used as an adhesive, bonding metal to metal, glass to glass, ceramic, porcelain, wood and many other materials.
Εργαλεία εφαρμογής
Συσκευασία
Χαρακτηριστικά
Self-levelling
Solvent-free
Excellent adhesion
Perfectly clear
High hardness
Επιφάνεια
Wood
Metal
Stone
Ceramics
Porcelain
Cardboard
Τεχνικά στοιχεία
Απόδοση
Αραίωση
Επιφανειακό στέγνωμα
Χρόνος Επαναβαφής
• Remove any silicone and oils that may be present on the metal using nitro thinner or epoxy thinner.
• Clean and dry the application surface thoroughly.
• Sand the surface well with sandpaper.
• Apply the epoxy primer in one or two coats, according to the instructions of the specific product.
• Mix component A with component B using a low-speed mixer for 2-3 minutes. Then leave the mixture for 30 seconds and mix again for a further 1 minute.
• Important! The full quantity of component A must be mixed with component B in the ratio provided for each set. If a smaller quantity of final product is required, the components must be weighed in the same ratio by weight.
• Also ensure that the final material (A+B) does not remain in the container for more than 50 minutes without being used, as the material will begin to set and will no longer be workable.
• Apply the product in one or two coats. For better workability, it may be diluted with 5-10% nitro thinner or epoxy thinner. The next coat should be applied after the previous one has dried, always after testing.
• Important: at temperatures above 35°C, product adhesion may be reduced.
