Desmo Floor W.B. – Water-based stone and concrete floor varnish
Water-based penetrating acrylic varnish for waterproofing and maintaining stamped floors and surfaces made of concrete, cement or brick, as well as surfaces finished with decorative cement screed. Enhances the surface colours without altering them and forms a film with high adhesion, good chemical and mechanical resistance, and an excellent aesthetic appearance. Will not yellow when exposed to sunlight.
Application tools
Packaging
Features
High adhesion
High mechanical and chemical resistance
Non-yellowing
High resistance to solar radiation
Surfaces
Stamped concrete flooring
Decorative cement screed
Concrete
Cast concrete
Technical Data
Coverage
Thinning
Touch Dry
Recoat Time
• Apply to dry, clean surfaces free from any material that may impair adhesion.
• Successful application depends on correct substrate preparation and proper application of the product.
• Apply DESMO FLOOR W.B. directly to the surface with a roller or brush in one or two coats, without thinning.
• On non-absorbent surfaces, the product may be thinned with 5–10% water.
• Apply the second coat after the first coat has dried.
While working, keep the tools “wet” in the container or in the paint bucket. Drain off the paint well from tools into the container and clean them with water.
