Ducofix – High-hardness industrial enamel
High-gloss metal enamel paint for surfaces where high mechanical resistance and hardness are required.
Suitable for both professional and domestic use.
For proper protection, application over an anti-corrosive primer is required, followed by two coats of the product.
When applied correctly, it provides protection for approximately 2–5 years.
Application tools
Packaging
Features
• Excellent gloss and hardness
• High coverage
• Fast drying
• Excellent chemical and mechanical resistance
Surfaces
Ideal for surfaces of:
• Metal
Technical Data
Coverage
Thinning
Touch Dry
Recoat Time
It is applied on dry, clean surfaces free of materials that prevent adhesion.
Application’s success depends on the proper preparation of the surface and the correct application of the material.
Remove silicone or oils from the metal surface with solvent.
Prime surface with ANTIRUST or IRON GUARD.
• Once the primer begins to dry, apply DUCOFIX enamel in one or two coats.
• To adjust the viscosity, thin with 5% white spirit.
• Apply the second coat once the first coat has dried completely.
During application, keep the tools wet by leaving them in the container or paint tray. Drain as much paint as possible from the tools back into the container, then clean them with white spirit or nitro thinner.
