Epoxy Primer HB
Epoxy Primer is a two-component epoxy impregnating primer, suitable for concrete and metal surfaces.
It provides excellent adhesion between the final epoxy coating and the substrate.
Ideal for concrete and metal surfaces.
It also offers high mechanical resistance and chemical protection against acids, alkalis, oils, greases and similar substances.
Available in two shades: clear and grey.
Εργαλεία εφαρμογής
Συσκευασία
Χαρακτηριστικά
Anti-corrosion protection
Provides permanent conductivity
Prevents static electricity build-up
Suitable for structures exposed to severe chemical stress
Επιφάνεια
Metal Structures
Metal Frames
Industrial Buildings
Metal Stairs
Τεχνικά στοιχεία
Απόδοση
Αραίωση
Επιφανειακό στέγνωμα
Χρόνος Επαναβαφής
• Apply on dry, clean surfaces, free from dust, loose and friable particles that may prevent product adhesion. Successful application depends on proper substrate preparation and correct use of the material.
• Mix component A with component B using a low-speed mixer for 2-3 minutes. Then leave the mixture for 30 seconds and mix again for a further 1 minute.
• Important! The full quantity of component A must be mixed with component B in the ratio provided for each set. If a smaller quantity of final product is required, the components must be weighed in the same ratio by weight.
• Also ensure that the final material (A+B) does not remain in the container for more than 50 minutes without being used, as the material will begin to set and will no longer be workable.
• Apply the product in one or two coats. For better workability, it may be diluted with 5-10% nitro or epoxy thinner. The next coat should be applied after the previous one has dried, always after testing.
Important: At temperatures above 35°C, product adhesion may be reduced.
