Poly U Floor – 2K polyurethane floor coating
Features
Highly resistant to chlorine, alkaline and industrial environments
Easy to clean and disinfect
Maintains colour brilliance and gloss for many years
Excellent weather resistance
High adhesion
Excellent floor protection
High mechanical and chemical resistance
High coverage
Easy application
Surfaces
Concrete
Concrete
Stone
Industrial flooring
Epoxy flooring
Microcement flooring
Stamped concrete flooring
Terrazzo flooring
Technical Data
Coverage
Thinning
Touch Dry
Recoat Time
• Apply on dry, clean surfaces, free from materials that may prevent adhesion.
• Successful application depends on proper substrate preparation and correct application of the material.
• Mix component A with component B using a low-speed mixer for 2-3 minutes. Then leave the mixture for 30 seconds and mix again for a further 1 minute.
• Important! The full quantity of component A must be mixed with component B in the ratio provided for each set. If a smaller quantity of final product is required, the components must be weighed in the same ratio by weight.
• Also ensure that the final material (A+B) does not remain in the container for more than 50 minutes without being used, as the material will begin to set and will no longer be workable.
• Then apply the material to the surface with a roller or brush in one or two coats.
• To adjust viscosity, it may be diluted with 5% nitro thinner or polyurethane thinner.
• The second coat should be applied after the first coat has dried.
During application, keep tools “wet” inside the container or paint tray. Drain the paint thoroughly from the tools back into the tin and clean them with SL801 nitro thinner or polyurethane thinner. Cured material can only be removed mechanically.
