Super Epoxy Pool
Two-component opaque impregnating epoxy paint.
It creates a coloured, smooth, seamless final surface suitable for painting swimming pools.
It protects the pool surface from deterioration and chlorine, offering high resistance, very good elasticity and excellent adhesion.
Εργαλεία εφαρμογής
Συσκευασία
Χαρακτηριστικά
High adhesion
Excellent surface protection
High chemical and mechanical resistance
High coverage
Easy application
Επιφάνεια
Concrete
Tiles
Τεχνικά στοιχεία
Απόδοση
Αραίωση
Επιφανειακό στέγνωμα
Χρόνος Επαναβαφής
• Apply on dry, clean surfaces, free from dust, loose and friable particles that may prevent product adhesion. Successful application depends on proper substrate preparation and correct use of the material.
Required:
• Clean and dry the application surface thoroughly.
• Prime the surface, if required, with epoxy primer.
• Mix component A with component B using a low-speed mixer for 2-3 minutes. Then leave the mixture for 30 seconds and mix again for a further 1 minute.
• Important! The full quantity of component A must be mixed with component B in the ratio provided for each set. If a smaller quantity of final product is required, the components must be weighed in the same ratio by weight.
• Also ensure that the final material (A+B) does not remain in the container for more than 50 minutes without being used, as the material will begin to set and will no longer be workable.
• Apply the product in one or two coats. For better workability, it may be diluted with 5-10% nitro thinner or epoxy thinner. The next coat should be applied after the previous one has dried, always after testing.
• Important: at temperatures above 35°C, product adhesion may be reduced.
During application, keep tools “wet” inside the container or paint tray. Drain the paint thoroughly from the tools back into the tin and clean them with nitro thinner or epoxy thinner.
